HomeEnginesMitsubishi S4L2-Y461ML

Mitsubishi S4L2-Y461ML Engine Engine

Part of the Mitsubishi S4L2 engine family — 6 variants share parts & fitment.

Engine specifications

Displacement1.8 L
Cylinders4
Aspirationnatural
Rated speed1800 rpm
Gross power22 kW

Parts cataloged across the Mitsubishi S4L2 family

65
Part #DescriptionCategory
00149MAIN BREAKERair_filter
010005Air filter, Control box, Radiator, Document holder, Coolant overflow jug, Battery (behind panel), Starter (below muffler—on engine), Oil level indicator (dipstick), Muffler, Fuel filterair_filter
002306Trailer Wheel Bearing Grease Zerk Fittingbelt
042418Dinse-Style Connector Kit Accepts #4 to #1/0 AWG cable. Kit includes one male Dinse-style plug which attaches to the work and/or weld cables and plugs into the Dinse-style receptacles on the power source.cable_connector
042419Extension Kit for Dinse-Style Cable Connectors Accepts #4 to #1/0 AWG cable. Used to adapt or extend weld and/or work cables. Kit includes one male Dinse-style plug and one in-line female Dinse-style receptacle.cable_connector
191981Tweco®-Style Connector Accepts #1/0 to #2/0 AWG cable. Kit includes one male Tweco-style plug which attaches to the work and/or weld cables and plugs into the Tweco-style receptacles on the power source.cable_connector
210061Tweco®/Dinse Adapter One-piece adapter with a male Tweco-style plug (to power source) on one end and a female Dinse-style receptacle (for weld cable connection) on other end.cable_connector
301611Universal Connector Kits Tweco®-style receptacles 301595 Dinse-style receptacles Includes receptacles, wrench and electrical joint compound.cable_connector
043947Fuel cap can be padlocked to prevent vandalism. A built-in flame arrestor prevents flames or sparks from entering the fuel tank.fuel_filter
300585FA-1D Lockable Flame Arrestor Fuel Capfuel_filter
004550WARNING: Burn hazard. Lamps become extremely hot while in use. Allow 10–15 minutes for cooling before handling or lowering mast. Touching a hot lens or fixture can cause severe burns.glow_plug
00243Greasegrease
010056Main circuit breaker, Engine ignition switch (key activated), Circuit breaker indicator light, Engine hours metermain_circuit_breaker
00175Mast Light Connectionsmast_light_connections
252782Engine Filter Kit Includes all filters required for proper engine maintenance. Oil filter, primary and secondary fuel filter, and primary air filter.oil_filter
010054Operator’s manual must be stored on machineoperator_manual
000139WARNINGother_service
000187AVERTISSEMENT Décharge électrique. Des tensions potentiellement mortelles sont générées par cet appareil. Assurez-vous que l’appareil est sécuritaire avant de le réparer ou d’en effectuer l’entretien. Le non-respect de cette consigne pourrait entraîner la mort ou des blessures graves.other_service
000278WARNINGother_service
00112Component Locationsother_service
00124MLT5150MV • MLT5200IV • MLT5200IVCANother_service
00159Light Tower Set Upother_service
00167Main Control Panelother_service
00186Raising the Mastother_service
00201ENGINE START SWITCHother_service
00202Starting the Unitother_service
00203Starting the Unitother_service
00216Unit ID Tagother_service
00227VIN Tagother_service
00230Prestart Checklistother_service
003983Breakers Located Behind The Panelother_service
004505Control Panelother_service
004558Winch Assemblyother_service
004621Unit Serial Number Locationsother_service
004622Component Locationsother_service
004625Control Panelother_service
00463Component Locationsother_service
00464Main Control Panelsother_service
010052other_service
01145N/Aother_service
10000006179Clifford POWER SERVICE LEVEL CHECKSother_service
11275Decal, Magnum logo w/ web - red vinylother_service
1191721-phase, 120/240 V, 50 A plug (NEMA 14-50P) to fit full KVA receptacle.other_service
12141Decal set, LT eng/safety 4-langother_service
12262Decal, 4000/5000 set up 4-lang (MW)other_service
12880Decal, instruction 4000/5000 4-lang (EW)other_service
195301Blue water-resistant cover with Miller logo resists stains and mildew, and protects the finish of your welder.other_service
209649Form: SFC626Bother_service
907529Spectrum® 375 X-TREME™ See literature PC/9.2plasma_cutter
907579Spectrum® 625 X-TREME™ with 12-foot (3.7 m) torch See literature PC/9.6plasma_cutter
907579001Spectrum® 625 X-TREME™ with 20-foot (6.1 m) torch See literature PC/9.6plasma_cutter
043688RCCS-14 Remote Current Control* North/south rotary-motion fingertip control attaches to TIG torch using two hook-and-loop fasteners. Includes 26.5-foot (8 m) cord and 14-pin plug.remote_control
151086RCC-14 Remote Current Control* East/west rotary-motion fingertip control attaches to TIG torch using two hook-and-loop fasteners. Includes 26.5-foot (8 m) cord and 14-pin plug.remote_control
194744RFCS-14 HD Foot Control* Heavy-duty foot current control. Includes 20-foot (6 m) cord and 14-pin plug.remote_control
195511Control de corriente o voltaje completoremote_control
242211020RHC-14 Hand Control* Miniature hand current control. Dimensions: 4 x 4 x 3.25 inches (102 x 102 x 82 mm). Includes 20-foot (6 m) cord and 14-pin plug.remote_control
301580Wireless Remote Foot Control* For remote current control. Receiver plugs directly into the 14-pin receptacle of Miller machine. 90-foot (27.4 m) operating range. Wireless antenna kit 300749 is recommended.remote_control
301582Wireless Remote Hand Control* For remote current, voltage and contactor control. Receiver plugs directly into the 14-pin receptacle of Miller machine. Up to 300-foot (91.4 m) operating range. Wireless antenna kit 300749 is recommended.remote_control
00233GLOW PLUGspark_plug
0439522/0 Stick Cable Set, 100/50 ft. (30.5/15 m) Consists of 100-foot (30.5 m) 2/0 electrode cable with holder, and 50-foot (15 m) work cable with clamp. 300 A, 100% duty cycle.stick_cable
1738512/0 Stick Cable Set, 50 ft. (15 m) Consists of 50-foot (15 m) 2/0 electrode cable with holder, and 50-foot (15 m) work cable with clamp. 350 A, 100% duty cycle.stick_cable
195196No. 2 Stick Cable Set, 15 ft. (4.6 m) Consists of 15-foot (4.6 m) No. 2 electrode cable with holder, and 15-foot (4.6 m) work cable with clamp. 200 A, 100% duty cycle.stick_cable
300836No. 2 Stick Cable Set, 50 ft. (15 m) Consists of 50-foot (15 m) No. 2 electrode cable with holder, and 50-foot (15 m) work cable with clamp. 200 A, 100% duty cycle.stick_cable
009708Unit ID tag, Vehicle Identification Number (VIN) tagunit_id_tag
010053Warning: Hot surface, moving partswarning_label

Parts cataloged across all variants of this engine family — verify the exact part fits your specific variant and serial number before ordering.

Also powers generators

This engine powers 8 generator set(s) on Facts About Generators — same parts apply.

Common questions

What equipment uses the Mitsubishi S4L2-Y461ML engine?

The Mitsubishi S4L2-Y461ML engine powers 20 machine(s), including John Deere 370E, John Deere 410 P, John Deere 410E, John Deere 410E II, John Deere 460 P.

What is the displacement of the Mitsubishi S4L2-Y461ML?

The Mitsubishi S4L2-Y461ML has a displacement of 1.8 liters.