Air Compressor Specifications
| Pressure | 90 PSI |
|---|---|
| Pressure | 6.3 bar |
Troubleshooting
3Symptoms & remedies
| Symptom | Remedy |
|---|---|
| Do not use quick disconnect couplings at tool. | See instructions for correct set up. |
| Keep away from rotating drive spindle and abrasive. Rotation may continue for several seconds after the throttle has been released. | Do not lay the tool down until rotation has stopped. |
| Failure of the accessory or abrasive, or of the workpiece, can generate high-velocity projectiles. Grinding sparks and even small projectiles can injure eyes and cause blindness. | Always wear impact-resistant eye and face protection when involved with or near the operation, repair or maintenance of the tool or changing accessories on the tool. Be sure all others in the area are wearing impact-resistant eye and face protection. |
Fault codes and symptom→remedy steps extracted from this unit’s service/owner documentation; verify against the official manual before servicing.
Available documents
Reference
About
Chicago Pneumatic CP3750-085AA7 — air compressor. Specifications and parts compiled from manufacturer documents.