Air Compressor Specifications
| Lubrication | Each time the 93 and 95 Series Diggers are disassembled for maintenance, repair or replacement of parts, lubricate the tool as follows: Inject approximately 3 cc of oil into the air inlet of the Grip Handle Digger before attaching the air hose. |
|---|
Troubleshooting
3Symptoms & remedies
| Symptom | Cause | Remedy |
|---|---|---|
| Sluggish operation | Dirt or oil gum accumulation on internal parts | Pour about 3 cc of a clean, suitable, cleaning solution into the air inlet and operate for 30 seconds. After flushing, pour about 3 cc of oil into the air inlet and operate the tool for 5 seconds to coat the internal parts with oil. |
| Loss of power | Worn Valve | Replace the Valve. |
| Loss of efficiency | Worn Piston and/or accessory | Replace Piston and or accessory. |
Fault codes and symptom→remedy steps extracted from this unit’s service/owner documentation; verify against the official manual before servicing.
Available documents
Service manual
About
Ingersoll Rand 93 and 95 Series — air compressor. Specifications and parts compiled from manufacturer documents.