Air Compressor Specifications
| Lubrication | Pivot Points and Bearings: As required by severity of usage, lubricate hook latch pins, hook pins, driving and holding dog pivot points, and the drum and sheave bearings with Ingersoll-Rand LUBRI-LINK-GREEN or SAE 30W oil. If puller is disassembled, lubricate pivot points and bearings with grease. Wire Rope: Clean with a brush or steam if there is dirt or other foreign material on the surface of the wire rope. Apply Ingersoll-Rand LUBRI-LINK-GREEN or SAE 30W oil. Brush, drip or spray lubricant weekly, or more frequently, depending on severity of service. Synthetic Strap: Synthetic strap should not be lubricated. Keep strap clean and dry. |
|---|
Troubleshooting
10Symptoms & remedies
| Symptom | Cause | Remedy |
|---|---|---|
| Puller does not ratchet. | Broken ratchet tooth on drum. | Replace drum. |
| Puller does not ratchet. | Broken spring. | Replace spring. |
| Puller does not ratchet. | Distorted dog. | Replace dog. |
| Puller does not ratchet. | Bent or damaged frame. | Replace frame. |
| Puller will not unload. | Driving dog not in correct position. | Move selector lever to down or unload. |
| Puller will not unload. | Driving dog spring damaged. | Replace driving dog spring. |
| Puller will not unload. | Holding dog spring damaged. | Replace holding dog spring. |
| Puller will not pull. | Driving dog not in correct position. | Move selector lever to haul in or pull position. |
| Puller will not pull. | Driving dog spring damaged. | Replace driving dog spring. |
| Puller will not pull. | Holding dog spring damaged. | Replace holding dog spring. |
Fault codes and symptom→remedy steps extracted from this unit’s service/owner documentation; verify against the official manual before servicing.
Available documents
Parts manual
About
Ingersoll Rand C400H — air compressor. Specifications and parts compiled from manufacturer documents.